Top-fix Rafter Bracket – Bending to the Pitch of Your Roof
Infinity Galvanised Steel Roofline offers a choice of options for attaching their guttering to your property. All available from stock in the 6 colours of the range*
There are the short and long back fascia brackets that you screw to the fascia board – if your property has one. The shorter back (45mm vs 75mm) brackets are more suitable where the depth of the fascia is shallower.
Rise and Fall Brackets
Rise and Fall Brackets with a drive-in spike which allow you to drive the spike into the mortar between stones but use the thread of the ‘rise and fall’ screw to keep the height of the gutters level whether or not the entry point of the spikes can be kept level.
(* N.B. the ‘Rise-and-Fall’ bracket is only available from stock in uncoated galv but price and lead times for colour coated can be arrange on request or you could choose to use the ‘touch up paint spray’ after installation).
Side-fix rafter brackets
The Side-fix rafter brackets that are screwed to the side of the rafters under the roof tiles already have the twist applied to the long shaft.
Top-fix rafter brackets
Then there are the Top-fix rafter brackets that are mounted on the roof slope or battens, under the roof tiles, by their long shaft. We can supply a Gutter Rafter Bracket bending tool tp bend our Top-fix rafter support brackets (also known as ‘hangers’) to suit the roof pitch.
Please note this tool is only to bend the brackets and not to twist them. For that requirement, we sell the ‘side-fix rafter brackets’ (see above).
Top-fix Rafter Bracket Bending Tool
This Top-fix Rafter Bracket Bending Tool (GSTTFBB) is a well-known, tried-and-tested staple used by professional installers on the continent for years where galvanised steel guttering is as prevalent as plastic guttering is here in the UK.
Weight=4kg, Length = 720mm
Buy this Tool Online
Or get in touch on 0800 644 44 28 we'd love to hear from you!